Description
The DVR4200AHD is a heavy duty, water proof, Full HD* 4 channel DVR with GPS. It can connect up to four cameras, each with an individual trigger to record real time video in Full HD 1080p*. Recordings are stored on an internal 2.5” HDD or SSD (up to 2TB, purchased separately) with SD card backup (up to 128GB). WiFi or USB data transfer, so no need to remove the internal drive. GPS to log the position and speed of the vehicle. Playback/monitor on any screen via the CVBS/RCA video output or connect to either Nesa NSM-DVR42T7 or NSM-DVR42T10 monitors for touchscreen control. Multiple recording modes including alarm and motion detection. An ideal solution for pilot vehicles and tow trucks, who require long recording times.
Optional extras: Dash mount display w/event log button (DVR-42PANEL)
*Recording resolution is camera resolution dependant. Can use mixed camera types.
1080p HD cameras designed specificity for this drive recorder: CCD-073AHD rear camera, CCS-501AHD side camera and AHD-FFW forward facing camera.
DVR record times (hours)
Times are an approximate guide only
| Number of Channels | Resolution & Bitrate | 1TB SSD | 2TB SSD |
|---|---|---|---|
| 1 Channel/Camera | 720p (2Mbps) | 1200 | 2400 |
| 1080p (4Mbps) | 600 | 1200 |
|
| 4 Channels/Cameras | 720p (2Mbps) | 300 | 600 |
| 1080p (4Mbps) | 150 | 300 |
- No of Channels/Cameras: 1~4
- Resolution: 1080p, 720p or D1 @30fps
- Video Compression: H.264
- Video Bit Rate: 128kbps~6Mbps/channel
- Audio Bit Rate: 32kbps
- Storage: HDD or SSD up to 2TB
- Backup Storage: SD Card up to 128GB
- Power: 10~32v DC
- Lockable Waterproof Case with O-Ring Seal
- WiFi for Data Files Transfer
- USB3.0 Data Transfer and Firmware Updates
- Vehicle Alarm Inputs
- Multiple Recording Triggers: Power On, Motion Detection, Alarm Trigger
- Full Touchscreen Support
- Dimensions: 170mm x 150mm x 40mm
